IT Technician for Beginners with 5 Exams

IT Technician for Beginners with 5 Exams

From: £139.83 Inc. VAT per month for 6 months

Clear

Description

 
 
If you’ve ever considered working as an IT Technician, but felt you lacked the knowledge or skills to launch your career, this might be what you’re looking for.
 
This course bundle is aimed at absolute beginners to IT who want to start a career as an IT Technician or just develop their skills in this area. The course assumes you have no technical knowledge of IT whatsoever. To understand what IT Technicians do and perform it at a technical level, you must first possess an understanding of basic IT literacy as well as certain technologies, which you will be taught through this course. Through this course, you will gain a series of globally recognised certifications from CompTIA and Microsoft, including the CompTIA A+, CompTIA Network+, and CompTIA Cloud Essentials. You will also possess a set of technical skills you can apply to a vast range of IT job roles.
 

Who are CompTIA? Watch this video to find out.

 
From the beginning, we teach you about basic IT literacy, basic software features and functions, basic networking, operating systems, and basic IT security. From there, the course steps up a notch focusing on these areas in more depth and exploring new areas such as cloud computing and Windows 10. As you progress through the various stages, your technician skills will gradually develop.
 

An example of the CompTIA A+ certification you can gain through this course.

 

An example of the CompTIA Network+ certification you can gain through this course.

 
The course bundle is made up of a series of certification and non-certification courses. Of the five courses in total, four have a final exam at the end and lead to a certification. The first course (CompTIA IT Fundamentals) provides a soft introduction to basic IT terminology, concepts and technology.
 

Watch this video to learn more about CompTIA certifications.

 
If you’re looking to get ahead of the crowd and don’t have any technical experience, then you might want to consider adding live labs to your course.
 
Learn More About Live Practice Labs
 
What’s included in this certification bundle?
 
This bundle contains five courses in total comprising of three CompTIA certification courses (inclusive of three official CompTIA exams), one CompTIA non-certification course (no exam) and one Microsoft Windows 10 course (with one exam). This entire course MUST be completed in the order listed below. Failure to do this could result in you not being able to understand the content of the next course in this series. If however you feel the material covered in course 1 is already familiar to you and is of no benefit, then you can skip ahead to courses 2-5. Click on a title to see a full breakdown of what you’ll be learning in each course.
 
As part of this bundle, you will also get access to a MeasureUP practice test for each certification course. Scroll down to read more about the MeasureUP practice tests and how they will help you pass your exams the first time.
 
Courses included:



Module 1: Software
1.1 Course And Instructor Introduction
1.2 Software Operating Systems – Part 1
1.3 Software Operating Systems – Part 2
1.4 Software Operating Systems – Part 3
1.5 Software Operating Systems – Part 4
1.6 Software Operating Systems – Part 5
1.7 Common FileTypes – Part 1
1.8 Common FileTypes – Part 2
1.9 Software Management Best Practices – Part 1
1.10 Software Management Best Practices – Part 2
1.11 Alternative Software Technologies
1.12 Basic Software Features And Functions
 
Module 2: Hardware and IT
2.1 Basic Wired And Wireless Peripherals – Part 1
2.2 Basic Wired And Wireless Peripherals – Part 2
2.3 Basic Wired And Wireless Peripherals – Part 3
2.4 Common Computer Connector Types – Part 1
2.5 Common Computer Connector Types – Part 2
2.6 Internal Computer Components – Part 1
2.7 Internal Computer Components – Part 2
 
Module 3: Security
3.1 Basic Security Threats – Part 1
3.2 Basic Security Threats – Part 2
3.3 Basic Security Threats – Part 3
3.4 Security Best Practices – Part 1
3.5 Security Best Practices – Part 2
3.6 Web-Browsing Best Practices
3.7 Web-Browsing Best Practices Demo – Part 1
3.8 Web-Browsing Best Practices Demo – Part 2
3.9 Web-Browsing Best Practices Demo – Part 3
 
Module 4: Networking
4.1 Setup And Configure Basic SOHO Router
4.2 Wireless Router Demo
4.3 Compare And Contrast Cellular Wireless And Wire Data Connections
4.5 Compare And Contrast Different Methods OfSharingAndStorage – Part 1
4.6 Compare And Contrast Different Methods OfSharingAndStorage – Part 2
4.7 Compare And Contrast Different Methods OfSharingAndStorage – Part 3
 
Module 5: Basic IT Literacy
5.1 Setting Up A Basic Workstation – Part 1
5.2 Setting Up A Basic Workstation – Part 2
5.3 Setting Up A Basic Workstation Demo – Part 1
5.4 Setting Up A Basic Workstation Demo – Part 2
5.5 Setting Up A Basic Workstation Demo – Part 3
5.6 Basic Methods Of Navigating An Operating System – Part 1
5.7 Basic Methods Of Navigating An Operating System – Part 2
5.8 Basic Methods Of Navigating An Operating System Demo – Part 1
5.9 Basic Methods Of Navigating An Operating System Demo – Part 2
5.10 Basic Support Concepts
5.11 Basic Backup Concepts
5.12 Environmental And Safety Concepts – Part 1
5.13 Environmental And Safety Concepts – Part 2
 
Module 6: Course Review
6.1 Software Domain Review
6.2 Hardware Domain Review
6.3 Security Domain Review
6.4 Networking Domain Review
6.5 Basic IT Literacy Review
6.6 Course Review Question
6.7 Test Taking Tips
6.8 Course Outro




CompTIA A+ 220-901
 
 
Module 1 Introduction To Personal Computers And IT Certification
1.1 Personal Computer ConceptsPart 1
1.2 Personal Computer Concepts Part 2
1.3 Becoming An IT Professional
1.4 Certification Basics
1.5 Review
 
Module 2 Internal Hardware Components
2.1 Motherboards Part 1
2.2 Motherboards Part 2
2.3 BIOS Part 1
2.4 BIOSPart 2
2.5 BIOSPart 3
2.6 Power Supplies Part 1
2.7 Power SuppliesPart 2
2.8 Central Processing Unit Part 1
2.9 Central Processing UnitPart 2
2.10 Central Processing Unit Part 3
2.11 MemoryPart 1
2.12 MemoryPart 2
2.13 Review
 
Module 3 Storage Fundamentals
3.1 Storage Overview
3.2 Magnetic Drives
3.3 Solid State And Flash Drives
3.4 Optical Drives
3.5 RAID Technologies
3.6 Tape Drives
3.7 Installing Hard Drives
3.8 Review
 
Module 4 Expanding Hardware Capabilities
4.1 Expansion Components OvereviewPart 1
4.2 Expansion Components OvereviewPart 2
4.3 Expansion TechnologiesPart 1
4.4 Expansion TechnologiesPart 2
4.5 Video CardsPart 1
4.6 Video CardsPart 2
4.7 Sound Cards
4.8 Networking Interface Cards
4.9 Alternative Expansion Devices
4.10 Review
 
Module 5 Working With Peripheral Devices
5.1 Peripheral Devices Overview
5.2 Input Devices Part 1
5.3 Input DevicesPart 2
5.4 Input Devices Part 3
5.5 Output Devices Video MonitorsPart 1
5.6 Output DevicesVideo MonitorsPart 2
5.7 Output Devices Video Monitors Part 3
5.8 Output DevicesPrinters And ScannersPart1
5.9 Output Devices Printers And Scanners Part2
5.10 Output DevicesPrinters And ScannersPart 3
5.11 Output Devices Printers And ScannersPart 4
5.12 Input And Output Devices
5.13 Review
 
Module 6 Mobiles Devices
6.1 Mobile Devices Overview
6.2 Laptop Computer Components Part 1
6.3 Laptop Computer ComponentsPart 2
6.4 Laptop Computer Expansion Capabilities
6.5 Replacing Portable Computer ComponentsPart 1
6.6 Replacing Portable Computer ComponentsPart 2
6.7 Additional Mobile Devices Part 1
6.8 Additional Mobile DevicesPart 2
6.9 Mobile Device Ports And Connectors
6.10 Review
 
Module 7 Computer Networking
7.1 Networking FundamentalsPart 1
7.2 Networking Fundamentals Part 2
7.3 Network DevicesPart 1
7.4 Network Devices Part 2
7.5 Cable And Connectors Part 1
7.6 Cable And ConnectorsPart 2
7.8 TCP/IP FundamentalsPart 1
7.9 TCP/IP FundamentalsPart2
7.10 TCP/IP FundamentalsPart3
7.11 TCP/IP Fundamentals Part 4
7.12 TCP/IP FundamentalsPart 5
7.13 Internet Connectivity
7.14 Wireless Networks Part 1
7.15 Wireless NetworksPart 2
 
Module 8 Hardware And Network Troubleshooting
Troubleshooting Models Part 1
Troubleshooting ModelsPart 2
Troubleshooting Physical IssuesPart 1
Troubleshooting Physical Issues Part 2
Troubleshooting Physical IssuesPart 3
Troubleshooting Networking Issues Part 1
Troubleshooting Networking IssuesPart 2
Troubleshooting Mobile Devices
Troubleshooting Printers
 
 
CompTIA A+ 220-902
 
Module 1: Introduction To Operating Systems
1.1 Introduction
1.2 Operating Systems Overview Part 1
1.3 Operating Systems Overview Part 2
1.4 Operating Systems Functions Part 1
1.5 Operating Systems Functions Part 2
1.6 Windows OS Versions Part 1
1.7 Windows OS Versions Part 2
1.8 Windows OS Versions Part 3
1.9 Basic Navigation And Management Part 1
1.10 Basic Navigation And Management Part 2
 
Module 2: Installing Windows Operating Systems
2.1 PreInstalling Task
2.2 Performing Clean Installs Part 1
2.3 Performing Clean Installs Part 2
2.4 Performing Upgrades
2.5 Migrating User Data
 
Module 3: Configuration And Management In Windows
3.1 Using Control Panel And PC Settings Part 1
3.2 Using Control Panel And PC Settings Part 2
3.3 Using Control Panel And PC Settings Part 3
3.4 Using Graphical Administrative Tools Part 1
3.5 Using Graphical Administrative Tools Part 2
3.6 Using Graphical Administrative Tools Part 3
3.7 Using Graphical Administrative Tools Part 4
3.8 Using Command Line Administrative Tools
3.9 Configuring Networking Part 1
3.10 Configuring Networking Part 2
3.11 Configuring Networking Part 3
3.12 Operating System Security Part 1
3.13 Operating System Security Part 2
3.14 Operating System Security Part 3
3.15 Windows Preventative Maintenance
 
Module 4: Utilizing Alternative Operating Systems
4.1 Mac And Linux Overview
4.2 OS Features And Tools
4.3 Best Practices Using Alternative Operating Systems
4.4 Basic Command Line Administration In Linux
4.5 Network Operating Systems Part 1
4.6 Network Operating Systems Part 2
 
Module 5: Virtualization And Cloud Computing
5.1 Understanding Virtualization
5.2 Basic Cloud Concepts
 
Module 6: Managing Mobile Devices
6.1 Mobile Devices Overview
6.2 Mobile Operating Systems
6.3 Network Connectivity And Email
6.4 Mobile Device Synchronization
 
Module 7: Understanding System Security
7.1 Understanding Threats To Security Part 1
7.2 Understanding Threats To Security Part 2
7.3 Understanding Threats To Security Part 3
7.4 Understanding Common Prevention Methods Part 1
7.5 Understanding Common Prevention Methods Part 2
7.6 Understanding Common Prevention Methods Part 3
 
Module 8: Troubleshooting And Operational Procedures
8.1 Troubleshooting Theory
8.2 Communication And Professionalism Part 1
8.3 Communication And Professionalism Part 2
8.4 Operational And Safety Procedures
8.5 Security And Privacy Guidelines For Troubleshooting
8.6 Troubleshooting Operating Systems Part 1
8.7 Troubleshooting Operating Systems Part 2
8.8 Troubleshooting Mobile Devices Part 1
8.9 Troubleshooting Mobile Devices Part 2
8.10 Troubleshooting Common Security Issues Part 1
8.11 Troubleshooting Common Security Issues Part 2
8.12 Conclusion




Module 1: Networking Concepts
1.1 Basic Networking
• Intro to networking
• Networking architectures
• Activity: Basic Networking
1.2 OSI Model
• Layer 7 – Application
• Layer 6 – Presentation
• Layer 5 – Session
• Layer 4 – Transport
• Layer 3 – Network
• Layer 2 – Data Link
• Layer 1 – Physical
• Activity: Exploring the OSI Model
1.3 Protocols and Ports
• Protocols and ports overview
• Activity: Examining Protocols and Ports
• Connection-oriented vs. connectionless
• Transmission Control Protocol (TCP)
• User Datagram Protocol (UDP)
• Activity: Comparing TCP and UDP
• Internet Protocol (IP)
• Internet Control Messaging Protocol (ICMP)
• Internet Group Messaging Protocol (IGMP)
• Activity: Examining the Lower Layer Protocols
• Layer 7 Remote Control Protocols
• Layer 7 File Transfer Protocols
• Layer 7 Messaging Protocols
• Activity: Examining Messaging Protocols
• Layer 7 Web Traffic Protocols
• Layer 7 Streaming Media Protocols
• Layer 7 Infrastructure Management Protocols
1.4 Switching
• Properties of Network Traffic
• Contention Management
• Activity: Creating Collision and Broadcast Domains
• Interface Properties and Segmentation
• Activity: Creating a Basic Network Segment
• Switching prt 2
• Activity: Switching
• Switching Loop Management
• Activity: Managing Switching Loops
• VLANs
• Activity: Creating VLANs
1.5 Routing
• ARP
• Activity: Examining ARP
• IP Addressing Basics
• Activity: Configuring IP
• Routers
• Activity: Setting Up a Router
• Routing Basics
• Activity Adding Static Routes
• VLAN Routing
• Activity: Routing Between VLANs
• NAT/PAT
• Activity: Configuring NAT/PAT
• Routing Protocols
• Activity Configuring a Routing Protocol
• Firewalls
• Activity: Configuring Firewalls
1.6 Advanced Switching and Routing Concepts
• IPv6 Concepts
• Activity: Exploring IPv6
• Performance Concepts
• Distributed Switching
• Software-defined Networking
1.7 IP Addressing
• Public vs. Private
• Loopback and Reserved
• Subnet Mask
• Default Gateway
• Virtual IP
• Subnetting
• Activity: Learning to Subnet
• Address Assignments
1.8 Network Types and Topologies
• Wired Topologies
• Wireless Topologies
• Network Types
• Technologies that Facilitate the Internet Of Things (IoT)
1.9 Wireless Technologies
• Radio Basics
• 802.11 Standards
• Wi-Fi Frequencies
• Wi-Fi Antenna Concepts
• Bluetooth
• Cellular
• Site Surveys
• Activity: Using an RF Spectrum Analyzer
1.10 Cloud Concepts
• Types of Services
• Cloud Delivery Models
• Security Implications/Considerations
• Activity: Exploring Cloud Services
1.11 Network Services
• DNS Service
• Activity: Setting up DNS
• DHCP Service
• Activity: Setting Up DHCP
• NTP
• IPAM
Module 2 – Infrastructure
2.1 Cabling Solutions
• Media Types
• Activity: Testing a Fiber Optic Cable
• Plenum vs.PVC
• Connector Types
• Activity: Crimping on an RJ-45 Connector
• Transceivers
• Termination Points
• Activity: Terminating Cable to a 110 Block
• Copper Cable Standards
• Copper Termination Standards
• Activity: Creating a Crossover Cable
• Ethernet Deployment Standards
2.2 Network Device Placement and Installation
• Network Interface
• Repeater
• Hub
• Bridge
• Switch
• Router
• Modem
• Wireless Access Point
• Activity Setting up a WAP
• Firewall
• Media Converter
• Wireless Range Extender
• VoIP Endpoint
2.3 Advanced Network Devices
• Multilayer Switch
• Wireless Controller
• Load Balancer
• IDS/IPS
• Proxy Server
• Activity Configuring Proxy Settings
• VPN Concentrator
• AAA/RADIUS Server
• UTM Appliance
• NGFW/Layer 7 Firewall
• VoIP PBX
• VoIP Gateway
• Content Filter
2.4 Virtualization and Network Storage Technologies
• Virtual Networking Components
• Network Storage Types
• Connection Types
• Jumbo Frames
2.5 WAN Technologies
• Service Types
• Transmission Mediums
• Characteristics of Service
• Activity Configuring WAN Links
• Termination
Module 3 – Network Operations
3.1 Documentation

• Diagram Symbols
• Standard Operating Procedures/Work Instructions
• Logical vs. Physical Diagrams
• Rack Diagrams
• Change Management Documentation
• Wiring and Port Locations
• IDF/MDF Documentation
• Labeling
• Network Configuration and Performance Baselines
• Inventory Management
• Activity Using Documentation
3.2 Business Continuity and Disaster Recovery
• Availability Concepts
• Recovery
• Activity Backing Up Your Data
• MTTR
• MTBF
• SLA Requirements
3.3 Scanning, Monitoring, and Patching
• Processes
• Event Management
• SNMP Monitors
• Metrics
• Activity: Testing the Network
3.4 Remote Access Methods
• VPN
• RDP
• SSH
• VNC
• Telnet
• HTTPS/Management URL
• Remote File Access
• Out-of-Band Management
• Activity: Making Remote Connections
3.5 Policies and Best Practices
• Privileged User Agreement
• Password Policy
• On-boarding/Off-boarding Procedures
• Licensing Restrictions
• International Export Controls
• Data Loss Prevention
• Remote Access Policies
• Incident Response Policies
• BYOD
• AUP
• NDA
• System Life Cycle
• Safety Procedures And Policies
• Activity: Creating Policies and Procedures
Module 4 – Network Security
4.1 Physical Security Devices
• Detection
• Prevention
4.2 Authentication and Access Control
• Authorization, Authentication, and Accounting
• Multifactor Authentication
• Access Control
• Activity: Examining Access Control Mechanisms
4.3 Basic Wireless Network Security
• WPA
• WPA2
• TKIP-RC4
• CCMP-AES
• Authentication and Authorization
• Geofencing
• Activity: Demonstrating the Need for Wireless Security
4.4 Common Network Attacks
• DoS
• Social Engineering
• Insider Threat
• Logic Bomb
• Rogue Access Point
• Evil Twin
• War-driving
• Phishing
• Ransomware
• DNS Poisoning
• ARP Poisoning
• Spoofing
• Deauthentication
• Brute Force
• VLAN Hopping
• Man-in-the-Middle
• Exploits vs. Vulnerabilities
• Activity Conducting a Phishing Attack
4.5 Network Device Hardening
• Changing Default Credentials
• Avoiding Common Passwords
• File Hashing
• Generating New Keys
• Activity Supporting Secure Authentication and Encryption
• Upgrading Firmware
• Patching and Updates
• Disabling Unnecessary Services
• Using Secure Protocols
• Disabling Unused Ports
4.6 Common Mitigation Techniques
• Signature Management
• Device Hardening
• Change Native VLAN
• Switchport Protection
• Network Segmentation
• Privileged User Account
• File Integrity Monitoring
• Role Separation
• Restricting Access Via ACLs
• Honeypot/Honeynet
• Penetration Testing
• Activity: Implementing a Honeypot
Module – Network Troubleshooting and Tools
5.1 Network Troubleshooting Methodology
• Identify the Problem
• Establish a Theory of Probable Cause
• Test the Theory to Determine the Cause
• Establish a Plan of Action to Resolve the Problem and Identify Potential Effects
• Implement the Solution or Escalate as Necessary
• Verify Full System Functionality and , if Applicable, Implement Preventive Measures
• Document Findings, Actions, and Outcomes
5.2 Using the Appropriate Tool
• Hardware Tools – Basic Hand Held
• Hardware Tools – Analyzers
• Activity: Troubleshooting with Hardware Tools
• Software Tools – Testers and Analyzers
• Activity: Troubleshooting with Software Tools
• Software Tools – Command Line
• Activity: Using Command Line Tools
5.3 Troubleshoot Wired Connectivity and Performance
• Signal Issues:
o Attenuation
o Latency
o Jitter
o Crosstalk
o EMI
• Activity Troubleshooting Signal Problems
• Physical Issues:
o Open/short
o Incorrect pin-out
o Incorrect Cable Type
o Bad Port
o Damaged cable
o Bent pins
• Transceiver Issues:
o Transceiver mismatch
o TX/RX reverse
o Duplex/speed mismatch
• Activity: Troubleshooting Transceiver Problems
• Traffic Flow Issues:
o Bottleneck
o VLAN mismatch
o Network connection LED status indicators
5.4 Troubleshoot Wireless Connectivity and Performance
• Signal Loss:
o Attenuation
o Reflection
o Refraction
o Absorption
• Latency & Jitter
• Antenna Issues:
o Incorrect antenna type
o Incorrect antenna placement
• Incorrect WAP type
• WAP Issues:
o Interference
o Channel overlap
o Overcapacity
o Distance limitations
o Frequency mismatch
o Power levels
o Signal-to-noise ratio
• WAP Misconfiguration:
o Wrong SSID
o Wrong passphrase
o Security type mismatch
• Activity Troubleshooting WAP Issues
5.5 Troubleshoot Common Network Service Issues
• Common Network Issues:
o Physical Connectivity
o Incorrect IP Address
o Incorrect Gateway
o Incorrect Netmask
o Names Not Resolving
o Untrusted SSL Certificate
• DHCP Issues:
o Duplicate IP Addresses
o Expired IP Address
o Rogue DHCP
o Exhausted DHCP Scope
• Firewall/ACL Issues:
o Blocked TCP/UDP Ports
o Incorrect Host-based Firewall Settings
o Incorrect ACL Settings
• Advanced Network Issues:
o DNS Server Issues
o Duplicate MAC Addresses
o Incorrect Time
• Unresponsive Service
• Hardware Failure
• Activity Case Study: Troubleshooting an Unusual Network Issue




Module 1: Characteristics of Cloud Services from a Business Perspective
1.1 Understand common terms and definitions of cloud computing and provide examples.
1.2 Describe the relationship between cloud computing and virtualization.
1.3 Name early examples of cloud computing.
1.4 Understand several common definitions of cloud computing and their commonalities/differences.
1.5 Recognize what types organizations might benefit from cloud computing.
1.6 Recognize what types organizations might not benefit from cloud computing.
1.7 Distinguish between the different types of clouds, including XaaS, IaaS, PaaS, and give examples of them.
 
Module 2: Cloud Computing and Business Value
2.1 Recognize the similarities and differences between cloud computing and outsourcing.
2.2 Understand the following characteristics of clouds and cloud services from a business perspective.
2.3 Demonstrate how the characteristics of cloud computing enhance business value.
 
Module 3: Technical Perspectives/Cloud Types
3.1 Understand the difference between private and public types of clouds from a technical perspective and provide examples.
3.2 Understand at a high level the following important techniques and methods for cloud computing deployment.
3.3 Explain technical challenges and risks for cloud computing and methods to mitigate them for.
3.4 Describe the impact of cloud computing on application architecture and the application-development process.
 
Module 4: Steps to Successful Adoption of Cloud
4.1 Explain typical steps that lead to a successful adoption of cloud computing services.
4.2 Understand the roles and capabilities of cloud computing vendors and dependencies on the vendors.
4.3 Understand the following organizational capabilities that are relevant for realizing cloud benefits.
4.4 Describe multiple approaches for migrating applications.
 
Module 5: Impact and Changes of Cloud Computing on IT Service Management
5.1 Understand the impact and changes cloud computing on IT service management in a typical organization.
5.2 Use a structured approach based on ITIL to explore the potential impact of cloud computing in your organization.
 
Module 6: Risks and Consequences of Cloud Computing
6.1 Explain and identify the issues associated with integrating cloud computing into an organization’s existing compliance risk and regulatory framework.
6.2 Explain the implications for direct cost and cost allocations.
6.3 Understand how to maintain strategic flexibility.




Module 1: Introducing Windows 10
1.1 Course Introduction
1.2 What Makes Windows 10 Different
1.3 Overview Of Windows 10 Features
1.4 Navigating And Using Windows 10 Part 1
1.5 Navigating And Using Windows 10 Part 2
 
Module 2: Installing Windows 10
2.1 Preparing For Installation
2.2 Installation Options
2.3 Upgrading And Migrating Part 1
2.4 Upgrading And Migrating Part 2
 
Module 3: Configuring Devices
3.1 Overview Of Configuration Tools
3.2 Common Configuration Options
3.3 Managing User Accounts Part 1
3.4 Managing User Accounts Part 2
3.5 Using Control Panel
3.6 Using Windows Administration Tools Part 1
3.7 Using Windows Administration Tools Part 2
3.8 Using Windows Power Shell Part 1
3.9 Using Windows Power Shell Part 2
 
Module 4: Configuring Network Connectivity
4.1 TCPIP Network Connectivity Part 1
4.2 TCPIP Network Connectivity Part 2
4.3 TCPIP Network Connectivity Part 3
4.4 Name Resolution
4.5 Wireless
4.6 Remote Access Overview Part 1
4.7 Remote Access Overview Part 2
4.8 Troubleshooting Connectivity
 
Module 5: Managing Storage, Data, And Printers
5.1 Managing Hard Disks Part 1
5.2 Managing Hard Disks Part 2
5.3 Managing Hard Disks Part 3
5.4 Creating And Managing Storage Spaces
5.5 Overview Of Data Access
5.6 Configuring And Managing File Access
5.7 Managing Shared Folder
5.8 Understanding Work Folders
5.9 Managing Printers
 
Module 6: Managing Apps
6.1 Installing And Configuring Applications
6.2 Managing Apps From The Windows Store
6.3 Managing Microsoft Edge Web Browser
 
Module 7: Managing Device Security
7.1 Configuring Network Security Part 1
7.2 Configuring Network Security Part 2
7.3 Configuring Local Security
7.4 Configuring Data Security Part 1
7.5 Configuring Data Security Part 2
7.6 Configuring Device Security
 
Module 8: Maintaining Windows 10
8.1 Updating Windows 10
8.2 Monitoring And Optimizing Windows 10 Part 1
8.3 Monitoring And Optimizing Windows 10 Part 2
 
Module 9: Troubleshooting And Recovery
9.1 Managing Devices And Drives
9.2 Recovery Files
9.3 Recovering Devices
 
Module 10: Deploying Windows 10 Enterprise Desktops
10.1 Overview Of Image Based Deployment
10.2 Automating Installations
10.3 Windows Activation
 
Module 11: Managing User Profiles And User State Virtualization
11.1 Managing User Profiles Part 1
11.2 Managing User Profiles Part 2
11.3 User State Virtualization
11.4 User Profile Migration
 
Module 12: Managing Desktop And Application Settings Using Group policy
12.1 Using Group Policy To Manage Windows 10 Devices Part 1
12.2 Using Group Policy To Manage Windows 10 Devices Part 2
12.3 Using Group Policy To Manage Windows 10 Devices Part 3
12.4 Using Group Policy To Manage Windows 10 Devices Part 4
12.5 Using Group Policy To Manage Applications Part 1
12.6 Using Group Policy To Manage Applications Part 2
12.7 Configuring And Managing Client Hyper-V


Certification exams included:
 

  1. CompTIA A+ 220-901
  2. CompTIA A+ 220-902
  3. CompTIA Network+ N10-007
  4. CompTIA Cloud Essentials CLO-001
  5. Microsoft 70-697: Configuring Windows Devices (Windows 10)

 
MeasureUP practice tests included:
 

  1. CompTIA A+ 220-901
  2. CompTIA A+ 220-902
  3. CompTIA Network+ N10-007
  4. CompTIA Cloud Essentials CLO-001
  5. Microsoft 70-697: Configuring Windows Devices (Windows 10)

 

 
Features of MeasureUP practice tests:
 

  • Questions are similar to exam questions, allowing you to test your knowledge of exam objectives
  • Detailed explanations for both correct and distractor answers reinforce the material
  • ‘Study Mode’ covers all objectives ensuring topics are covered
  • ‘Certification Mode’ (timed) prepares students for exam taking conditions
  • Instant, drill-down score reports tell you exactly the areas to focus on
  •  

    Watch this video to learn more about MeasureUP practice tests.

     
    Course access period: 12 months online access
     
    Salary and job prospect information
     
    We use two excellent third-party resources to allow you to check your earning potential and job prospects before starting this course.
     

     
    The first is IT JobsWatch, which allows you to check what employers are paying people on average with specific certifications, such as the ones contained in this bundle. Click here and enter the name of the certification you would like to see salary information on. Remember to check the earning potential for all the certifications in the bundle, especially the more advanced ones as these will offer the highest salary.
     

     
    The second is Payscale, which also does the above, but allows you to see what types of job titles are paying more based around the certification you enquire about. Click here and enter the name of the certification you would like to see salary and job title information on. Again, remember to check the earning potential for all the certifications in the bundle, especially the more advanced ones as these will provide information on higher level job roles. Although some higher level roles may require experience, the information will give you an idea of future earning potential and career prospects.
     
    What career paths are available to me through this course?
     

    • IT Technician
    • Field Technician
    • IT Support Technician
    • IT Consultant
    • Systems Administrator
    • Network Engineer
    • Network Field Engineer
    • Network Deployment Engineer
    • Network Operations Engineer
    • Network Support Engineer
    • Network Operations Center Engineer
    • Network Consultant
    • Network Technician
    • Data Center Manager

     
    How is each course taught?
     

    All courses are online and self-paced, meaning you do it in your own home, in your own time, at your own pace and best of all… any where in the world, providing you have access to a laptop, PC or desktop computer, and an internet connection. Each lesson is pre-recorded allowing you to pause, fast-forward, skip sections, or go back to another lesson if you need to. The lessons are multi-media based, which means video and audio are used to teach the lessons. Your tutor will PowerPoint slides, illustrations, diagrams and give demonstrations to teach each class.  Most lessons are also interactive, prompting the learner to participate.  This might involve answering on-screen questions, participating in tasks.

     

    Watch this video to learn what the CompTIA A+ has done for some people.

     
    How long will it take me to complete each course?
     

    As mentioned above, our courses are self-paced.  Some people finish their course faster than others.  Each certification course is between 12-30 hours. If you choose to only do one of the certification courses from this bundle, then it will take you less time than if you do two or three or all of them.  No matter what though, you will always have 12 months to complete your course.

     
    How do I book my exams?
     
    When you’re ready to sit your exams, email [email protected] with your request along with the title of the exam you wish to take. We will then send you an email with instructions on how to complete your exam booking. The exams for this course must be sat at your local test center, which we will locate for you.
     
    What do I need?
     

    All you need is an internet connection and a device, such as a smart phone, tablet, laptop or PC, and an internet connection. To get the most out of the course, we recommend you access it using either a laptop or desktop computer through Google Chrome.

     

    Learn more about the CompTIA Network+ certification as part of this course.

     
    Course Features
     
    With Hudson’s e-learning system, certification has never been simpler! You can be starting your IT career or taking your current IT skills to the next level in just a few short weeks. Our learning system gives you all of the benefits of a live class at just a fraction of the cost. Courses include:
     
    hudson-expert-instructor-led-training

    Expert Instructor-Led Training

    We only use the industry’s finest instructors in the IT industry. They have a minimum of 15 years real-world experience and are subject matter experts in their fields. Unlike a live class, you can fast-forward, repeat or rewind all your lectures. This creates a personal learning experience and gives you all the benefit of hands-on training with the flexibility of doing it around your schedule 24/7.

     
    hudson-visual-demonstrations-multimedia-presentations

    Visual Demonstrations & Multimedia Presentations

    Our courseware includes instructor-led demonstrations and visual presentations that allow students to develop their skills based on real world scenarios explained by the instructor. We always focus on real world scenarios and skill-set development.

     
    hudson-quizzes-exam-simulators

    Quizzes & Exam Simulators

    Our custom practice exams prepare you for your exams differently and more effectively than the traditional exam preps on the market. You will have practice quizzes after each module to ensure you are confident on the topic you have completed before proceeding.
     
    This will allow you to gauge your effectiveness before moving to the next module in your course. Hudson courses also include practice exams designed to replicate and mirror the environment in the testing center. These exams are on average 100 questions to ensure you are 100% prepared before taking your certification exam.

     
    hudson-social-learning-networking

    Social Learning & Networking

    Hudson has designed a world class Learning Management System (LMS) This system allows you to interact and collaborate with other students and staff, form study groups, engage in discussions in our [email protected] Forums, rate and “like” different courses and stay up to date with all the latest industry knowledge through our forums, student contributions and announcement features. This LMS is unmatched in the industry and makes learning fun and enjoyable.

     
    hudson-flash-cards-educational-games

    Flash Cards & Educational Games

    Hudson knows that education is not a one size fits all approach. Students learn in different ways through different tools. That is why we provide Flash Cards and Education Games throughout our courses. This will allow you to train in ways that keep you engaged and focused. Each course will have dozens of Flash Cards so you can sharpen your skill-sets throughout your training as well as educational games designed to make sure your retention level of the materials is extremely high.

     
    hudson-navigation-controls

    Navigation & Controls

    Hudson’s self-paced training programs are designed in a modular fashion to allow you the flexibility to work with expert level instruction anytime 24/7. All courses are arranged in defined sections with navigation controls allowing you to control the pace of your training. This allows students to learn at their own pace around their schedule.
     

    Non-cancellation of course

    Please note that due to the large amount of downloadable material on this course, our standard 7 day guarantee/cancellation/refund policy does not apply.

     


     
    Add experience to your CV with Live Labs

     
    If you’re looking to get ahead of the crowd and don’t have any technical experience, then you might want to consider adding live labs to your course. Because many IT jobs take place at the virtual level (i.e. behind a keyboard and mouse), the experience you’ll gain through a live lab is very similar to experience you’ll gain in the workplace. Consequently many employers regard live lab experience as a valued asset on a CV.
     
    Live labs are also a great tool for experienced technicians as they allow individuals to put their newly acquired course skills to practice. To find out more about our range of live labs, including costs, and how they can enhance your skills, click here.
     
     
    Learn More About Live Practice Labs
     

    Additional information

    Payment options

    4 monthly installments, 5 monthly installments, 6 monthly installments, Single payment